7/8" x 7/16" Shank |Mag-Bit 730.1416| Timber Bits | 1 Piece application-track-rail-steel Appropriate for brushing large surfaces

Appropriate for brushing large surfaces with a high removal capacity

A46T Professional Grade

hard to reach working areas to grind and snag weld fillets

the body of the hammer drive anchor is made from rustproof

Chromated Yellow Zinc Plating is similar to an Electro Galvanized fastener but may offer slightly better corrosion protection

7/8" x 7/16" Shank |Mag-Bit 730.1416| Timber Bits | 1 Piece application-track-rail-steel Appropriate for brushing large surfaces40" OAL, 36" Twist Length. 7 16" Hex Q. C. Shank MAG728 and MAG730 have Quick Change 7 16" hex shank to work with pneumatic and hydraulic drill motors. Bits accept Mag Bit Countershark, counter bore tools. 40" overall length with a 36" flute or 30" overall length with a 26" long flute. Double flute and double spur design for clean holes and quick chip removal. Back tapered to prevent binding in deep holes. Machined on a true center for less run out